Blower Service Or Replacement - Napoleon S20i Manuel D'installation Et D'utilisation

maintenance
EN
6.8

blower service or replacement

Turn off all electrical power to the appliance.
A.
Remove the 2 screws securing the cover to the blower housing (Fig. 6-5). Set the cover and screws
B.
aside.
Remove the 4 screws securing the retainer to the blower housing (Fig. 6-6). Slide blowers (attached
C.
to retainer) out of the housing deflectors and lift them up. Set screws and blowers (attached to retainer)
aside.
If dust and debris have accumulated, vacuum the blowers and blower housing prior to re-installation.
D.
If blower replacement or service is required, remove the 8 screws securing the blowers to the retainer
E.
(Fig. 6-7).
Reverse these steps to reinstall the blower.
F.
Cover
30
W415-2797 / D / 05.07.21
Appliance hidden
for clarity.
Fig. 6-5
THERMODISC
FAN-SPEED CONTROL
Fig. 6-7
FAN FAN
Wiring Diagram
Fig. 6-6
POWER
CORD
G
POWER
CORD