Dust Bin And H20 Tank - Amibot Signature Edition Jungle Mode D'emploi

Maintenance

Dust bin and H20 tank

Dust bin
Empty the dust bin every time
the robot completes a cleaning
cycle. Remove the robot's dust
bin by pressing the release
button and empty it by opening
the magnetic cover, located on
the other side, using the "OPEN"
push buttons.
Then check that there is no dirt obstructing the robot's vacuum system.
H2O tank
Empty the dust collected during the cleaning cycle and remaining
water from the H2O tank and then rinse it with clean water. Wait
until it is dry before using it again.
Regularly check that the H2O tank's two drip nozzles are
not obstructed by debris or limescale. Clean them with a
soft cloth.
Turn the dust bin over and clean
the castor. For optimum cleaning,
remove accumulated dust and
other debris caught around it.
19
EN