Starting Operation; Side Brush Installation - Amibot Swift Manuel D'utilisation

GENERAL OPERATION
GENERAL OPERATION

Starting Operation

1. For first use, take out the insulating strip in battery cabinet as shown in figure below, and then put
back the battery cover.
2. Place the product in a room with much free space, and then power it on to do cleaning work.
3. When the product runs out of power, the LED indicator in the illumination ring will turn red, and the
product will stop working.
Note:
* This product is not suitable for long-pile carpets

SIDE BRUSH INSTALLATION

SIDE BRUSH INSTALLATIO
Just put the L side brush at L place and R side brush at R place on the bottom and then push to fix it.
And vice versa—to pull up, side brush will be taken out.
6