Amibot Signature Edition Jungle Mode D'emploi page 17

Operating the robot
MAX
Figure 3
Setting a schedule
MAX
Figure 1
MAX
Figure 3
Press the PLAN button on the remote control (Figure 1). The schedule
time flashes; use the arrows to adjust the hour and minutes (Figure 2).
Press PLAN to validate the scheduled clean time (Figure 3). To cancel a
schedule, reset the scheduled PLAN time to 0 (Figure 4).
To do so, follow the same steps as above.
NOTE : Scheduled cleaning and the remote control times are cancelled when
the batteries are changed. Reset the time and scheduled cleaning time as above.
Press the CLOCK button on the
remote control (Figure 1). The
time flashes; use the arrows to
adjust the hour and minutes
(Figure 2). Press CLOCK again
to validate the time (Figure 3).
A quick beep indicates that the
time is set.
MAX
MAX
Figure 4
13
Figure 2
EN