User Safety - Stanley IntelliLaser Pro Mode D'emploi

GB
User Manual
Lock/Release
Pivot Button
LCD
Laser Power
Button
Push Pins
(Internal Storage)
LCD Screen
LASER
INTELLI_LASERPRO
1
LASER
_
INTELLI LASERPRO
STANLEY
IntelliLaser
®
The IntelliLaser Pro Laser Line Level/Stud Finder uses electronic signals to locate the edges of studs,
TM
joists or live AC wires through drywall or other common building materials. Once the edge of a stud has
been detected, the IntelliLaser
assistance for accurate marking.
The IntelliLaser Pro generates a laser line that can be tilted 180° for use in many leveling/alignment
TM
situations. The IntelliLaser
attachment to many wall surfaces.

User Safety

CAUTION: Read and understand all instructions. Failure to follow all instructions listed below may result
in personal injury:
• DANGER: Laser Radiation, avoid direct eye exposure, serious eye injury can result.
• DO NOT Use optical tools such as a telescope or transit to view the laser beam.
• ALWAYS position the laser so unintentional eye contact will be avoided.
• DO NOT operate the laser around children or allow children to operate the laser.
• DO NOT disassemble. Modifying the product in any way can increase the risk of laser radiation.
WARNING: Use of controls or adjustments or performance of procedures other than those specified in
this manual may result in hazardous laser radiation exposure.
• DO NOT operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• ALWAYS use only the batteries specified for use with this product. Use of any other batteries may create
a risk of fire.
• ALWAYS store idle product out of reach of children and other untrained persons. Lasers are dangerous in
the hands of untrained users.
2
Laser Plane
Aperture
Level Vial
Live Wire Warning LED
Mounting Hole
Activation Button
LASER
INTELLI
_
INTELLI LASERPRO
LASER LASER LASER
INTELLI_LASERPRO INTELLI_LASERPRO INTELLI_LASERPRO
2
LASER
_
INTELLI LASERPRO
Pro Laser Line Level/Stud Finder
TM
Pro display gives visual and audible indications. The laser line gives visual
TM
Pro also incorporates push pins and accommodating mounting holes for
TM
LASER LASER
1
LASER
LCD Screen
Callibration
_
Indicator
LASERPRO
AC Detection
3
LASER
_
INTELLI LASERPRO
Stud Sensor Mode
Battery
Indicator
Laser Indicator
4
LASER
_
INTELLI LASERPRO