Applications; Parts Counting - KERN ADB 100-4 Mode D'emploi

10 Applications

10.1 Parts counting

Before the balance can count parts, it must know the average part weight (i.e. the
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts, the so-
called reference quantity. Counting is then carried out on the basis of the calculated
average piece weight.
22
1. Select the reference piece number
In weighing mode call up menu item „C2", see chap.
11.1
Select the desired reference number of pieces using
the PRINT key, see chap. 11.2.
Confirm setting by pressing the TARE key.
Exit menu using ON/OFF key: Confirm query „SAVE"
by pressing the TARE key.
The balance returns automatically into weighing mode
2. Call application
Press the MODE key repeatedly until „Pcs" is
displayed.
3. Set to zero/taring
Press the TARE key to set the balance to zero or to
tare when using a weighing container.
ADB_ADJ-BA-e-1931