Unit Conversion - KERN ADB 100-4 Mode D'emploi

9.3 Zeroing
In order to obtain optimal weighing results, reset to zero the balance before weighing.
9.4 Sample weighing

Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus
a possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding the maximum load is indicated by the display „E ". Unload
weighing system or reduce preload.

9.5 Unit Conversion

By repeatedly pressing of the MODE key the weighed value can be switched over to
the available weighing and application units.
20
Unload the balance.
Press the TARE key.
Wait until the zero display appears.
Place the goods to be weighed and close the
windshield.
Wait for stability display
Read weighing result.
.
ADB_ADJ-BA-e-1931