Assemble The Display Unit To The Tripod; Assembly Eob-A01N; Assemble The Tripod To The Balance - KERN EOB-A01-A01N Instructions De Montage

(
Figure approximately)

3.2 Assemble the display unit to the tripod

4 Assembly EOB-A01N

4.1 Assemble the tripod to the balance

4
Turn-in support screws for stabilisation at
the lower side of the tripod.
Secure the display unit with the two
black rotary knobs to the tripod
according to illustration.
Position display unit with the rotary
knobs.
Fasten the tripod acc. to illustration with
the 4 screws on the lower side of the
platform.
Observe that during screwing
down not too much pressure is performed
on the weighing pan.
EOB-A01-A01N-IA-e-1310