Working With The Equipment - Parkside PRM 1200 A1 Traduction Des Instructions D'origine

GB IE
ed by the manufacturer. The use
of non-original parts will immedi-
ately invalidate the guarantee.
• Avoid wearing loose clothing or
clothing with hanging cords or
belts.
• Worn or damaged information
signs must be replaced.
• Use only authorised power ca-
bles of type H05RN-F, which are
no more than 75 m long and suit-
able for outdoor use. The power
cable wire cross section must be
at least 2.5 mm
pletely unroll cable drums before
use. Check the cable for damage
• Switch off the equipment and dis-
connect the plug from the socket
if the power cable is damaged.
If the power cable is damaged,
it must be replaced by the manu-
facturer, the customer services of
the same, or a qualiied person,
in order to avoid hazards.
• Do not connect a damaged
power cable to the mains. Do
not touch a damaged power
cable when it is connected to the
mains. A damaged power cable
may result in contact with live
parts.
• Prior to use, always check the
connecting cable and extension
cable for signs of damage or
wear and tear. If the cable gets
damaged during use, it must be
disconnected from the supply
network immediately. DO NOT
TOUCH THE CABLE BEFORE IT
HAS BEEN DISCONNECTED.
Do not use the machine, if the
cable is worn or damaged.
24
. Always com-
2
CAUTION! The following
states how damage to the ap-
pliance and possible injury to
people can be avoided:
In this way you avoid damage
to the appliance and possible
injury to people.

Working with the Equipment:

Do not place feet or hands
near or under rotating parts
when working. Risk of injury!
Observe the noise protection
and local regulations. The
use of the equipment may be
restricted or prohibited on cer-
tain days (e.g. Sundays and
public holidays), at certain
times of day (lunchtimes, night-
times) or in certain areas (e.g.
health resorts, hospitals etc.).
• Switch on the motor accord-
ing to the instructions and only
when your feet are at a safe
distance from the cutting tools.
• Do not use the equipment in
the rain, in poor weather, in a
damp environment, or on wet
grass. Work only in daylight or
with good lighting.
• Do not work with the equipment
when tired, lacking concentra-
tion or under the inluence of
alcohol or drugs. Always take
breaks in good time. Take a
sensible approach to the work.
• When working, ensure a irm
stance, particularly on slopes.
Always work across the slope,
never upwards or downwards.
Take particular care when