Declaration Of Conformity - Peg-Perego John Deere GROUND FORCE Manuel D'utilisation Et Entretien

Masquer les pouces Voir aussi pour John Deere GROUND FORCE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
30 • Inserire due pile AA da 1,5V nella radio, aprendo
lo sportello posteriore del cruscotto (vedi
figura).
31 • Posizionare la radio inserendo i due ganci nel
telaio sotto l'asta volante fissandola con una vite
come mostrato in figura.
32 • Montare a pressione la ghiera sottovolante e il
tappo.
33 • Spingere dal fondo del trattore l'asta volante fino
a farla fuoriuscire dall'estremità superiore del
telaio.
34 • Trattenere l'asta in questa posizione ed inserire il
volante.
35 • Fissare il volante con la vite e il dado forniti,
facendo attenzione ad inserire la vite nel foro
circolare e il dado in quello esagonale.
36/7•Infilare il tubo di scarico nel sostegno, facendo
attenzione al verso e avvitare con la vite lunga
specificata.
38 • Per agganciare il rimorchio al trattore, agire
come segue: inserire il gancio del rimorchio nel
foro che si trova sul retro del trattore e ruotarlo
(vedi fig. 39).
39 • Posizione 1: il rimorchio può essere rimosso.
Posizione 2: il rimorchio é bloccato.
ATTENZIONE: Il rimorchio può contenere
oggetti per un massimo di 10 kg.
40 • Sbloccare il cofano ruotando con una moneta il
gancio di sicurezza e aprire il cofano ruotandolo
di 90°.
41 • Collegare la spina della batteria a quella
dell'impianto elettrico.
42 • Chiudere il cofano ruotandolo di 90° e bloccarlo
ruotando con una moneta il gancio di sicurezza.
CARATTERISTICHE E USO DEL VEICOLO
43 • LEVA CAMBIO. Il veicolo ha 3 velocità.
ATTENZIONE: quando viene estratto
dall'imballo, il veicolo viaggia solo in 1ª marcia e
in retro. Per utilizzare la 2ª velocità, agire come in
figura 44.
44 • Svitare la vite del fermo 2ª velocità (fig. A).
Ruotare il fermo sino alla successiva posizione
(fig. B). Riavvitare il fermo. Le marce ora sono
tutte disponibili.
45 • PEDALE ACCELERATORE/FRENO ELETTRICO.
Sollevando il piede dal pedale, il freno entra in
funzione automaticamente.
46 • RADIO FM: Per accendere, spegnere e regolare il
volume ruotare la manopola A. Per selezionare le
stazioni radio premere i 2 pulsanti triangolari
(vedi figura).
SOSTITUZIONE DELLA BATTERIA
ATTENZIONE: I DISEGNI DELLE BATTERIE SONO
SOLO INDICATIVI. LA VOSTRA BATTERIA
POTREBBE DIFFERIRE DAL MODELLO
RAFFIGURATO. CIO' NON COMPROMETTE LE
SEQUENZE DI SOSTITUZIONE E DI CARICA
ILLUSTRATE.
47 • Aprire il vano batteria, come mostrato in
precedenza. Disconnettere le spine di
alimentazione della batteria.
48 • Svitare le 2 viti del fermabatteria e rimuoverlo
come mostrato in figura. Estrarre la batteria.
49 • Se avete acquistato o possedete una batteria Peg
Perego da 12V/12Ah dovrete eliminare lo
spessore di plastica (A) sfilandolo dal
fermabatteria.
50 • Riposizionare la nuova batteria con il
fermabatteria facendo attenzione ad inserirlo
lateralmente nelle sedi dei finti motori; fissare il
fermabatteria con le due viti.
51 • Collegare le spine della batteria e dell'impianto
elettrico. Chiudere il cofano riposizionando il
gancio, come mostrato in precedenza.
CARICA DELLA BATTERIA
ATTENZIONE: LA CARICA DELLE BATTERIE E
QUALSIASI INTERVENTO ALL'IMPIANTO
ELETTRICO DEVONO ESSERE EFFETTUATE DA
ADULTI.
LA BATTERIA PUÓ ESSERE CARICATA ANCHE
SENZA RIMUOVERLA DAL GIOCO.
52 • Inserire la spina del caricabatterie ad una presa
domestica seguendo le sue istruzioni allegate.
Collegare la spina B con la spina C del
caricabatterie.
A carica ultimata staccare il caricabatteria dalla
presa domestica, poi scollegare la spina C dalla
spina B.
53 • Inserire a fondo, fino allo scatto, la spina B nella
spina A. Inserire il fermabatteria. Ad operazioni
ultimate ricordarsi sempre di chiudere e fissare
lo sportello del vano batteria.
ENGLISH
Thank you for choosing a PEG PEREGO ®
product. For over 60 years PEG PEREGO
have been with you as you take your
children out - in carriages just after they are
born, then in strollers, and later on in pedal
and battery-powered toys.
Discover our complete range of products,
news and other information about the Peg
Perego world on our web site.
www.pegperego.com
Peg Perego S.p.A. is ISO 9001
certified.
This certification provides customers
and consumers with a guarantee of
transparency and assurance about the
company's working procedures.
IMPORTANT INFORMATION
Read this instruction manual carefully to learn how
to use the vehicle and teach your child to drive it
properly and safely while enjoying it at the same
time. Keep the manual safe for future reference.
If you transfer this product to another user, make
sure to include this instructions booklet.
Before using the vehicle for the first time, charge the
battery for 18 hours. Failure to do this could result in
irreparable damage to the battery.
• Ages 3+
• Maximum allowable weight 40 kg
• Single seat vehicle
• One 12V 8Ah sealed lead acid rechargeable battery
• Two drive wheels
• Two 165 W motors
• Speed in 1st gear 3,5 km/h
• Speed in 2nd gear 7,3 km/h
• Speed in reverse gear 3,4 km/h
Do not exceed the maximum allowable weight of 40
kg. This limit includes both the occupant and the load
(if any).
Peg Perego reserve the right to make changes to the
models and information in the present publication at
any time, for technical or company reasons.

DECLARATION OF CONFORMITY

A CE marked product, designed and type-approved
in compliance with the applicable EU directives,
intended for the markets and countries
implementing such standards.
PRODUCT NAME
John Deere GROUND FORCE
PRODUCT IDENTIFICATION CODE
IGOR0047
REFERENCE STANDARD (origin)
Directive on the safety of toys 2009/48/EC
Standard EN 71-1 + EN 71-2
Standard EN 71-3
Standard EN 62115
Directive on the electromagnetic compatibility
1999/5/CE or RED 2014/53/UE
Standard EN 55014
Standard EN 55022
Standard EN 61000
EN 60825-1 - Safety of laser products
Directive on WEEE - RAEE 2003/108/EC
Directive on batteries and accumulator 2008/103/EC
Directive on RoHS 2011/65/UE - EN 50581:2012
Reg. (CE) n.1907/2006 (Reach) allegato XVII-51 &52
phthalates in toys
The vehicle is not compliant with the requirements
of road transport standards and consequently cannot
travel on public roads.
DECLARATION of CONFORMITY
Peg Perego S.p.A. declares under its own
responsibility that the item in question has been
subjected to internal operational tests and approved
according to the standards in force at external,
independent laboratories.
PLACE AND DATE OF ISSUE
Italy - 02. 06. 2016
Peg Perego S.p.A.
via A. De Gasperi, 50
20862 - Arcore (MB) – ITALIA

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Igor0047

Table des Matières