Speedlink WASP2 USB Mode D'emploi page 8

matically detect the joystick and install Windows' own
DE
driver.
GB
2. Open the Start menu. Go to Settings and click on
FR
Control Panel.
Note: under Windows XP , in the layout view display-
ES
ed by default you can click directly on Control Panel.
IT
. Click on the Game Controllers icon.
Note: under Windows Me, this option is called Ga-
ming options.
. A list of controllers appears in which your selected
joystick should be listed as USB Flying Stick with the
status OK.
Note: Remove all other drivers from then list.
5. Now click on the USB Flying Stick entry and select
Properties and then Calibrate. Follow the instructions
on the screen.
6. Click on OK to save any settings you have made.
7. Select the Test tab to test all functions.
Troubleshooting
A message appears informing the joystick is not con-
nected correctly.
1. Make sure the joystick is correctly connected to the
USB port. Check that no other drivers are installed.
Remove all other drivers listed in the Controller
menu.
The joystick isn't working properly.
1. Check that your game software supports joysticks.
8