Basic Commands - John Bean B600 Manuel D'utilisation

1
2
3
4
5
6
20
4-15
4-15b
Layout
4.1.2

Basic commands

Fig. 4-15 Key pad
1 Menu keys (associated with a menu field)
2 ESC key
3 HELP key
4 START key
5 STOP key (emergency stop)
6 Key to decrease
7 OK key (to confirm)
8 Key to increase
Description of keys
1 Keys (example)
– Carry out or continue certain functions or steps of
operation.
The meaning of the menu keys is shown by associated
pictographs (symbols) on the screen.
2 ESC key
– Switch back to the previous screen (status).
– Exits the C codes procedures
– Deletes the help information and error messages.
3 HELP key
– Display useful information to explain a situation and – in
case of error codes – provide hints for remedy.
4 START key
– Start the measuring run.
Press to start balancer cycle, with the wheel guard down.
STOP key
5
– Stop a measuring run that has just been initiated and
brake the wheel.
6 OK key
– Inserts the Menu options selected previously.
Electromechanical STOp
Figure 4-15b
When the Electromechanical Stop Button is pressed,
the machine stops all automatic movements.
......