Promax OP-009-PS Manuel D'utilisation page 26

This menu has two configuration options:
Threshold Attenuation:
Maximum Attenuation:
When a measurement is done, this can be saved on the analyser memory by
accessing the option RUN DATALOGGER on the menu "UTILITIES", from the fibre
optic test screen (see figure below).
Page 6
Figure 4.-
It defines the maximum difference that can exist between
the reference signal with the highest power level and the
reference signal with the lowest power level. Any signal
out of this range will be deleted and not used as a
reference signal during the measurement process.
It defines the attenuation level used by the field meter to
display the status message on screen. If the attenuation
level is below this value the status message will be
"PASS" and if it is above this value the status message
will be "FAIL".
Figure 5.-
User's Manual OP-009-PS
09-2012