Functions - CAME ZLJ14 Manuel D'installation

PROGRAMMING PROGRAMMING
Description of programming commands
The ESC button is for:
{
- exiting menus;
- cancelling changes.
The < > keys are for:
- moving from one item to another;
- increasing or decreasing values.
To enter the menu, keep the ENTER
button pressed for at least one
second.
also for the submenus,
use the arrow keys to
select ...
Cycle Time
< 90s.
Cycle Time
< 100s.
{
To select menu items,
use the arrow keys ...
If the < > arrows are set to the
[Cycle time], you may edit their
value.
>
... the press ENTER to confirm ...
>
{
the <-----> signs on the display are for:
- showing the currently selected item
The ENTER key is for:
{
- entering menus;
- confirming or memorizing set values.
LANGUAGE
< English >

FUNCTIONS

Imp. Run
< TIMING ADJ >
< A.C.T. >
< Cycle Time >
90s.
... to exit the menu wait 30
seconds, or press ESC, until the
start up screen appears.
.. then press ENTER
.. then press ENTER
To increase or reduce the value
use the arrows...