JRG Sanipex MT Notice D'utilisation Et D'entretien page 169

E
Remark:
Ratchet torque wrench
The JRG Sanipex MT torque wrench must be used exclusively for tightening JRG Sanipex MT
cone grip unions. The corresponding torques are factory adjusted and do not need an additio-
nal maintenance if used as intended.
Remark:
Finished connection
We advise marking the finished connection with the marking pen JRG Code 4838.000.
Warning:
Malfunctioning of the ratchet torque wrench
If you have any malfunctioning or damaged torque wrench, we recommend to
replace the JRG Sanipex MT torque wrench with an exchange wrench.
Warning:
Repair of ratchet torque wrench
Ratchet torque wrenches must not be repaired.
169