Fault Diagnosis; Default Settings - flamco VHW 260 Installation Et Mode D'emploi

Resetting the consumption
The display shows the total consumption.
• Press "-". "del" flashes on the display.
• Press "OK". The counter is reset.
4.9

FAULT DIAGNOSIS

The appliance is equipped with a system for fault diagnosis. Malfunctions are
displayed on the digital display by means of a fault code and a fault symbol.
The fault must be eliminated and the appliance recommissioned before it is
ready for use again.
Resetting the fault display
• Press and hold the "OK" button for at least 3 seconds.

4.10 DEFAULT SETTINGS

After setting the temperature units and the time, the appliance adopts the
default settings.
• Heating mode: "Combi"
• Operating mode: "Manual"
• Selected temperature: 50 °C
1 2 3 4 5 6 7
am auto
pm
man
prog
kWh
0 6 12 18 24
1 2 3 4 5 6 7
am auto
pm
man
prog
kWh
0 6 12 18 24
menu ok
menu ok
> 3 s
1 2 3 4 5 6 7
am auto
pm
man
kWh prog
0 6 12 18 24
25