Mémoires / Memory Dialing - Depaepe 620 Série Notice D'utilisation

Memory Dialing
The Series 620/630 and 63FT have two types of
memory dialing. There are three (3) "One Touch"
memory locations and ten (10) "Two Touch"
memory locations.
The ten "Two Touch" memory locations require that
you press the MR button on the main keypad and
then press one of the numeric keys on the main
keypad.
Memory retention is dependent on the batteries.
Without a battery the numbers stored in memory are
retained for about 30 minutes.
Memory programming can be done in Tone or
Pulse. Memory dialing can be done in Tone or
Pulse.
You cannot program a "Flash" into a memory
location.
A maximum of 16 digits can be programmed into a
memory location.
Programming the memories or using the memories
is done with the testset in the "TALK" mode,
meaning connected (off hook) to a telephone line.
NOTE: During memory programming, the key
presses will have no effect on the telephone
line. You will hear tones in the receiver or on
the Amplified Speaker as you press the keys
indicating the key press was completed.
20