Before First Use; Electromagnetic Fields (Emf) - Philips HD7761 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
If a problem occurs that you cannot solve
by means of this user manual, contact the
Consumer Care Centre in your country. If the
problem cannot be solved, take the appliance
to a service centre authorised by Philips for
examination or repair. Do not attempt to
repair the appliance yourself, otherwise your
guarantee becomes invalid.
3.3 Caution
Do not place the appliance on a hot surface
and prevent the mains cord from coming into
contact with hot surfaces.
Unplug the appliance if problems occur during
grinding or brewing and before you clean it.
Do not move the appliance while it is operating.
The appliance becomes hot during use. Let
the appliance cool down before you store it.
During brewing, the lower part of the appliance
and the bottom of the jug become hot.
After you have unpacked the appliance, make
sure it is complete and undamaged. If in doubt,
do not use the appliance but contact the
Consumer Care Centre in your country.
This appliance is intended for normal
household use only. It is not intended for
use in environments such as staff kitchens
of shops, offices, farms or other work
environments. Nor is it intended to be used
by clients in hotels, motels, bed and breakfasts
and other residential environments.
3.4 Electromagnetic fields
(EMF)
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.
4
4 Before first use
4.1 Flushing the coffeemaker
You need to flush the coffeemaker once before
first use.
Open the water reservoir lid. Fill the water
1
reservoir with fresh cold water up to the
8-cup indication.
Note:
D
Do not put coffee beans or ground coffee in
the coffeemaker.
Close the water reservoir lid.
2
Put the jug in the appliance.
3
Press the on/off button.
4
The display lights up.

Publicité

Table des Matières
loading

Table des Matières