Release motor brake
(Fig. 20)
handle to stop.
Slow
(Fig. 21)
Fast
(Fig. 22)
(Fig. 23)
Scannable code
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the
warning instructions that
follow before you use the
product.
• This product is dangerous if
used incorrectly or if you are
not careful. Injury or death can
occur if you do not obey the
safety instructions.
• This product produces an
electromagnetic field during
operation. This field may
under some circumstances
919 - 003 - 23.10.2019
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
interfere with active or passive
medical implants. To reduce
the risk of serious or fatal
injury we recommend persons
with medical implants to
consult their physician and the
medical implant manufacturer
before operating this product.
• Always be careful and use
your common sense. If you
are not sure how to operate
the product in a special
situation, stop and speak to
your Husqvarna dealer before
you continue.
• Keep in mind that the operator
will be held responsible for
accidents that involve other
persons or their property.
• Keep the product clean. Make
sure that you can clearly read
signs and decals.
• Do not let a person use the
product unless you make sure
that they read and understand
the contents of the operator's
manual.
11