English; Installation And Ambient Conditions - Bonnet Neve KALEIDO INTEGRAL Mode D'emploi

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
1. DESCRIPTION
KALEIDO INTEGRAL are fan-assisted refrigerated showcases with built-in unit for the preservation
of fresh foods. Their main features and their dimensions are clearly illustrated in the drawings of
pages 14, 15, 16. As for their weights, packing included and excluded and their packing sizes, see
table I and drawings 6 and 7 on page 17. A wide range of optional accessories is also available for
enhanced functions. To this respect, contact the authorised after-sales service only.
2. TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the use of
fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a fork lift truck,
either manual or electric, provided that it is adequate for handling such appliances and it has the
requisite lifting capacity (see page 17 - figs. 6 and 7 and table I page 16). Handling is reserved
for the authorised after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing
visible damage, the machine too may have suffered some consequences. If so, unpack the machi-
ne in the presence of the carrier and sign, with reservation, the delivery bill. The manufacturer
disclaims all liability for damage caused by transportation or incorrect handling during
storage. Unpacking is reserved for the authorised after-sales service. Storing temperature must
be between -25°C and +55°C, air humidity between 30% and 95%. Keep the case away from direct
sunlight and from the elements.

4. INSTALLATION AND AMBIENT CONDITIONS

The cabinet must not be installed in premises containing explosive gas substances. It
can neither be used in the open nor exposed to the rain.
Prior to connecting the cabinet, make sure that the rating plate data correspond to the characteri-
stics of the existing electrical system (see page 18/19 - fig. 11 tab. II). For correct operation, the
machine must be placed on a level floor (see page 18 - fig. 8), far from sources of heat and/or di-
rect sunlight, doors, windows, fans or ventilation outlets (see page 18 - fig. 10). It must be granted
a reasonable free front area for customer service.
The room where the appliance is installed must comply with the requirements set forth
on page 18, fig. 9 and tab. II.
5. ELECTRICAL CONNECTION
IMPORTANT: The position of the cutoff switch must enable its actuation in any EMERGENCY situa-
tion (maximum distance 3 m). Show the position of the cutoff switch to any prospective operator.
The refrigerator must be installed by professionally qualified personnel, in accordance with the
instructions provided by the manufacturer and local regulations. Incorrect installation may cause
harm to persons, animals and property. The manufacturer assumes no responsibility for such da-
mages.
The cord must be spread out safe from shocks, away from liquids, water or sources of
heat and it must always be kept in perfect condition. If it should be damaged, have it
KALEIDO INTEGRAL
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana (BL)
ITALIA Tel. 0437/9681 Telefax 0437/967434

ENGLISH

36/59
PAGE:
UM000490
N° DOC.