Rear Panel - Kenwood Nexedge Serie Mode D'emploi

Indicator
The number of bars indicates the strength of incoming signals.
The antennal plus 3 bars represents a strong signal while only
the antenna represents a weak signal. No antenna means no
signal is present. On NXDN Trunking channels, the antenna
indicator fl ashes when you are out of range.
Appears when the Scrambler/ Encryption function is activated.
Appears when the Auto Recording function on the VGS-1 option
is activated.
Appears when the Auto Reply Message is on. (The location of
this icon is the same as the Auto Recording icon.)
Appears when the AUX A function is activated.
Appears when the AUX B function is activated.
Appears when the Lone Worker function is activated.

REAR PANEL

Antenna connector
6
Description
Power input
connector
External
speaker jack
Ignition
sense line