Basic Operations; Functions Of The Buttons On The Front Panel; Turning On The Unit - Kenwood DMX5020BTS Guide De Démarrage Rapide

Basic Operations

Basic Operations
Functions of the Buttons on
the Front Panel
1
2
3
4
5
6
NOTE
• The panels shown in this guide are examples
used to provide clear explanations of the
operations. For this reason, they may be different
from the actual panels.
Name
• Motion
Remote Sensor
1
• Receives the remote control signal.
[S], [R] ([VOL])
2
• Adjusts volume.
The volume will go up until 15 when you
keep pressing [R].
[HOME]
3
• Displays the HOME screen (P.9).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
[MENU]
4
• Displays the MENU screen.
• Pressing for 1 second turns the screen off.
[VOICE]
5
• Displays the Voice Recognition screen.
Reset
6
• If the unit or the connected unit fails to
operate properly, the unit returns to initial
settings when this button is pressed.
6

Turning on the Unit

The method of turning on is different
depending on the model.
1
Press the [HOME] button.
h The unit is turned on. h
● To turn off the unit:
1
Press the [HOME] button for 1 second.
NOTE
• If it is your first time turning the unit on after
installation, it will be necessary to perform Initial
setup (P.7).