External Components; Using External Audio/Video Players; Rear View Camera - Kenwood DMX110BT Mode D'emploi

External Components

Using external audio/video players

Ñ Starting playback
1
Connect an external component to the AV-IN
input terminal. (P.22)
2
Press the <8MENU> button.
3
Touch [AV-IN].
4
Turn on the connected component and start
playing the source.
Ñ For Video playback
1
When the operation buttons are not displayed on
the screen, touch the display.
The operation buttons disappear when 1 is
touched or when no operation is done for about 5
seconds.
✎
NOTE
• When the picture from the rear view camera is
displayed on the AV-IN screen, the picture output
from the Visual Output terminal disappears.

Rear view camera

To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.22)
Ñ Displaying the picture from the rear view
camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
1
English |
13