Zone 1 And Zone 2 Mixing Switch - Focal FLEX POWER 2120 Manuel D'utilisation

flex power
2120
U s e r m a n u a l
21
5.6 Setting the Auxiliary Input and Boost level
The Aux. input on the front panel allows to easily connect a temporary source like an MP3 player. Set the volume potentiometer to obtain a
sufficient sound level. Some MP3 players have an insufficient output signal. In this case, set the Aux. Boost selector to ON to increase the input
sensitivity.
5.7 Zone 1 and Zone 2 mixing switches
Flex Power can freely direct all the sources connected as inputs to the Zone 1 stereo outputs (amplified) and Zone 2 stereo outputs
2120
simultaneously or independently.
- If the Zone 1 selector is ON and Zone 2 is OFF, the source is directed only to the zone 1 outputs.
- If the Zone 1 selector is OFF and Zone 2 is ON, the source is directed only to the zone 2 outputs.
- If the Zone 1 and 2 selectors are ON, the source is directed simultaneously to both outputs.