Mounting In A Rack; Connections; Sound Level Remote Control (Vca) - Focal FLEX POWER 2120 Manuel D'utilisation

flex power
U s e r m a n u a l

3.2 Mounting in a rack

The chassis requires a 2 rack locations.
Use the brackets and accessories supplied for rack mounting.
•
To fix the chassis in the rack, use four screws with washers (not supplied) to avoid scratching the front panel of the brackets.
•
Note: Preferably choose neoprene washers as they prevent the nuts from becoming loose in case of vibrations or during transport.
Caution: To be able to transport the chassis once mounted in the rack, the rear of the chassis must be supported mechanically in the
rack.

4. Connections

4.1 Sound level remote control (VCA)

Single VCA to control the right and left channels simultaneously (mono or stereo mode).
•
Dual VCA to control the right and left channels independently.
•
Controller.
•
2120
VCA
R, L
VCA
R, L
VCA
Controller (0-10 V)
13