Using Accessories - Flex FX4111 Manuel De L'utilisateur

WARNING
Deformed or blunt or otherwise damaged
accessories can break causing injuries or
property damage.
WARNING
that they face backward. Operation in this
position may cause serious injury.
Accessory
FA401001
FA401002
Cutting
FA401003
FA402001
FA403001
Scraping

USING ACCESSORIES

Use sharp, undamaged
accessories only.
Do not attach the
accessories in such a way
For deep plunge cuts
in wood and plastics;
1-1/4" for fast separating cuts
Bi-Metal of non-ferrous metal
plunge cut profiles, non-hardened
blade nails, screws, and steel
profiles with smaller
dimensions.
1-1/4" HCS
For fast, deep
plunge cut
separating and plunge
blade with
cuts in wood and
curved
plastics.
tech
For small separating
and plunge cuts in
softwood, soft plastics,
3/8"
drywall, thin-walled
Bi-Metal
aluminum and non-
plunge cut
ferrous metal profiles
blade
and sheets, non-
hardened nails and
screws.
3-1/2"
For separating and
Titanium-
plunge cuts in wood,
coated
wood with nails, drywall,
segmented
PVC, nails and screws.
saw blade
For scraping residues
2" Rigid of mortar, concrete, tile
scraper and carpet adhesives
from hard surfaces.
FLEX Multi Tool is designed to tackle a variety
of tasks. A range of available accessories easily
turn the tool into a saw or into a sander, into a
scraper or a grout remover.
NOTE: Not all accessories are included with
your tool and should be purchased separately.
Accessories with STARLOCK interface from
other manufacturers should be compatible with
this tool.
Application
-15-
Included in Accessory Set