Flex FX4111 Manuel De L'utilisateur page 11

INSTALLING AND REMOVING THE
ATTACHMENT COLLAR (FIG. 8 & 9)
Loosen the collar locking bolt by using the
hexagon rod of the depth gauge or guide fence
and align the four positioning tabs (Fig. 8a) of
the clamp assembly with the grooves on the
neck. Then install the clamp assembly on the
tool, adjust it to the desired angle and securely
tighten the collar locking bolt (Fig. 8b).
Loosen the locking knob to insert the depth
gauge or edge guide and then tighten the
locking knob (Fig. 9).
Fig. 8a
Positioning Tabs
Fig. 8b
Attachment Collar
Fig. 9
Locking Knob
-11-
Positioning Tabs
Neck
Collar
Locking Bolt
Depth Gauge