Flex FX4111 Manuel De L'utilisateur page 9

WARNING
performing any assembly, adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
INSTALLING AND REMOVING ACCESSORIES
(FIG. 3 – 7)
WARNING
OPM or greater. Using accessories not
designed for this tool may result in serious
personal injury and property damage.
To install the accessory
Make sure that the On/Off switch is in the OFF
position and detach the battery pack from the
tool.
a. Turn the accessory release lever on the head
of the tool counterclockwise past the first
"click" which signals that the lever has been
engaged.
Detach the battery pack
from the tool before
Only use FLEX
accessories rated 20000
ASSEMBLY
Fig. 2
Fig. 3
Accessory
Release
Lever
-9-
Attach
Detach
Battery-Release
Button
Original Position