Beta 3009 Mode D'emploi page 5

EN
INSTRUCTIONS FOR USE
LIFTING A WHEEL
BEFORE STARTING ANY OPERATIONS, CHECK THAT THE PARKING BRAKE HAS BEEN ENGAGED.
Place the L-shaped lever into position "B"; rotate the pin placed in front of the pedal into position "C".
Operate the foot control lever to lift the wheel, making sure that it is released, before easing off pressure on it.
Continue with the operation until the tyre has been raised approximately 2 cm from the ground.
CAUTION:
If several wheel lifters are being used, pay attention to the type of ground.
If the wheel lifter is being used on nonflat surfaces, it is important not to be caught unprepared by any sudden
movements of the vehicle.
MOVING VEHICLE
Make sure to have enough staff to easily control the vehicle during any movements. Pay attention to any
descents, and accesses to ramps and the like, even if they are apparently insignificant.
Whenever placing a vehicle next to any structure and in case the wheel lifter needs removing, remember
to leave the proper amount of space.
CAUTION:
NO BRAKING DEVICE OF THE VEHICLE WILL BE OPERATING IF THE VEHICLE IS
HANDLED USING ONLY WHEEL LIFTERS ITEM 3009.
LOWERING A WHEEL
Place the L-shaped lever into position "A", and rotate the pin placed in front of the pedal into
position "C". Operate the foot control lever through repeated movements, until it is released,
so that the tyre can touch the ground, and no more pressure is exerted on the rollers.
Now repeat the placing steps above and take out the wheel lifter.
5