HQ Power VDPLPS36B Mode D'emploi page 4

Select the desired mode via the slide switches.
Sound Control: slide the switch to SOUND, the colour changes are sound-controlled.
Auto-Change: slide the switch to AUTO, the colour changes automatically.
b. Manual Mode
1 2
ON
OFF
■ ■
------------------
R
To select the Manual Mode, set dipswitches n° 7 and 8 to ON.
Dipswitch n° 1 and 2 control the brightness of the red (R) LEDs.
Dipswitch n° 3 and 4 control the brightness of the green (G) LEDs.
Dipswitch n° 5 and 6 control the brightness of the blue (B) LEDs.
Brightness settings
OFF/ON
ON/OFF
OFF/ON
ON/ON
c. Auto-Mix Colour Mode
1 2
ON
OFF
■ ■
--------------------------------------------------------------
To select the Auto-Mix Colour Mode, set dipswitch n° 8 to ON.
d. DMX-Controlled Operation
Control the projectors individually via your DMX controller. Every DMX channel has a different occupation with
different features.
1 2
ON
■ ■
OFF
Set at least one dipswitch from 1 to 7 to ON. Dipswitches n° 1 to 7 set the DMX address. Slide the Sound-Control
switch to SOUND.
After having addressed all the pinspots, you can start operating these via your lighting controller.
VDPLPS36B / VDPLPS36C
3 4 5
■ ■ ■
----------------- ------------------
G
00 = 0%
10 = 25%
01 = 50%
11 = 100%
3 4 5
■ ■ ■
Speed
3 4 5
■
■ ■
6 7 8
■ ■
■
B
6 7 8
■
■ ■
6 7 8
■ ■ ■
4 VELLEMAN