Fonctionnement Réversible - Airwell SX 18 Notice Technique

Masquer les pouces Voir aussi pour SX 18:
Table des Matières

Publicité

- Sécurité fonctionnement :
Raccordements simplifiés
Utilisation de caissons de traitement standards:
Fonctionnement réversible
Fonctionnement des ST
Accessoires complémentaires :
2 circuits frigorifiques distincts avec :
- Operational safety :
two totally independent cooling circuits per GC.
- Simplified connections :
all electrical and refrigeration connections are
grouped together on the front panel of the GC.
- Use of standard indoor units :
electrical and cooling connections without modifi-
cations.
- Heatpump operation with the possibility of operating
down to temperatures of –7°C.
- Operation of ST's :
capability of each ST to operate by cooling or by
electric heating :
standard power supply 3 N ~ 400 V - 50 Hz
and possibility of ~ 230 V - 50 Hz for models
MS 1040 cooling only and heatpump.
- Additional accessories :
3. COOLING CONNECTIONS
Pipe work is available as accessories, in various
lengths.
4. DESCRIPTION
4.1 Casing
- Panels covered with a primer and a finishing lacquer
oven baked at high temperature.
- Rear grille protecting the exchanger on standard
and heatpump models.
4.2 Insulation
- Soundproofing of outdoor condensing unit's 2 com-
pressor compartments.
4.3 Cooling circuits
- Hermetic compressor unit equipped with heat and
electric safety devices, connected with a fully brazed
and sealed cooling cricuit.
- Cooling filter built into the cooling circuit.
- "AROUND THE YEAR" System (accessory)
controlling the high pressure of the cooling circuit
for operation in cooling down to an outdoor
temperature of –10°C (cooling only models).
4

Publicité

Table des Matières
loading

Table des Matières