Ariston 3318628 Mode D'emploi page 38

GB
overview
INDEX
Overview
CE labelling .....................................................................38
Safety standards ...........................................................39
Product description
Présentation ...................................................................40
Technical data ................................................................40
Dimensions .....................................................................41
Installation
Before installing the appliance ................................42
Wall installation .............................................................42
Hydraulic diagram ........................................................43
Electrical connections .................................................45
Electrical connection of the Zone
Manager Kit ....................................................................47
Preparing the boiler for operation
Control unit programming .......................................48
Initialisation ....................................................................48
Configuring the module ............................................48
Air bleeding ....................................................................48
Frost protection function ..........................................48
Anti-jamming function ...............................................48
Addressing the system interface ............................49
Configuration of the temperature control
by zones ...........................................................................49
Meaning of the LEDs ...................................................49
Troubleshooting guide...............................................50
Thermoregolation
Temperature control ...................................................51
Settings
38
Overview
This manual is an integral and essential part of the
appliance. Read the instructions and warnings contained in
this manual carefully; they provide important directions on
installation, operation and maintenance safety.
The technical notes and instructions in this document are
intended for installation technicians so that they may carry
out this procedure correctly, in accordance with standard
procedures.
The control unit is designed to control multizone/
multitemperature heating systems. The use of the appliance
for purposes other than those specified is strictly forbidden.
The manufacturer shall not be held responsible for any
damage caused by improper, incorrect and unreasonable
use of the appliance or by the failure to comply with the
instructions provided in this manual. The installation
technician must be qualified to install heating appliances in
accordance with Law 46 dated 05/03/1990, on completion
of which task the abovementioned technician must issue
the customer with a declaration of conformity.
Installation, maintenance and all other interventions
must be carried out in full conformity with current
legal regulations and any instructions provided by the
manufacturer.
Incorrect installation can harm persons, animals and
possessions; the manufacturing company shall not be held
responsible for any damage caused as a result.
The multi-zone heating system management electronic
control unit is delivered in a cardboard package, make sure
the appliance is intact and that no parts are missing. If
any parts are not supplied or if the appliance is damaged,
please contact your supplier. Keep all packaging material
(clips, plastic bags, polystyrene foam, etc.) out of reach of
children as it may present a potential hazard. Before using
the control unit, switch off the main supply by setting the
external switch to "OFF". All repairs must be carried out by a
qualified professional using only original spare parts. Failure
to comply with the above instructions could compromise
the safety of the appliance and invalidate all liability on the
part of the manufacturer. To clean external parts, switch off
the control unit and set the external switch to "OFF". Clean
using a cloth dampened with soapy water. Do not use
aggressive detergents, insecticides or toxic products.
CE labelling
The CE mark guarantees that the appliance conforms to
the following directives:
- 2004/108/EC
relating to electromagnetic compatibility
- 2006/95/EC
relating to electrical safety