Installation; Before Installing The Appliance; Wall Installation - Ariston 3318628 Mode D'emploi

GB

installation

Before installing the appliance

WARNING
When drilling the wall for installation, take care
not to damage any electrical wiring or existing
piping.

Wall installation

Use a spirit level to position the control unit
on the wall. Follow the instructions below to
affix the control unit to the wall:
Fit the first screw, which will fit into the "lock
hole" on the rear of the control unit at the top
(Fig. 1).
Remove the main cover from the control
unit by undoing the two screws using a
screwdriver (Fig. 3).
Use a pencil to mark the position of the two
mounting points in the left and right corners
at the bottom of the control unit (Fig. 4).
Remove the control unit, drill the wall and fit
rawl plugs suitable for the type of support
(Fig. 5).
Install the control unit with its screws.
42
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5