Special Functions; Setting The Ring Tone On The Handset (Ring Melodies); Ring Tone Volume On The Handset - switel D6025 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7

Special functions

All further programming functions can be accessed by means of a very user-friendly menu. Here are a few general
instructions to help you find your way around the menu:
Programming is started by means of the
programming.
You can find the required level using the
This level is opened using the
In turn, you can find the required function using the
You can go back one level each time by pressing the
Each save procedure will be cancelled automatically if no input is made within 15 seconds.
You can leave programming mode at any time without making any changes by pressing and holding the
button.
You will find a complete overview of the menu in Chapter 7.13.
7.1

Setting the ring tone on the handset (ring melodies)

Your handset can respond with three different ringing tones when a call comes through. If you are using the telephone
system with several handsets, you can set different ring tones for external and internal calls.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the function EXT MELODY (ring tone for external calls) or INT MELODY (ring tone for internal calls/with
two handsets only) with the
4.
Select the required melody with
5.
Now select further menu functions or exit the menu by pressing and holding the
7.2

Ring tone volume on the handset

The volume of the ring tone on the handset can be adjusted in three steps. If at any time you do not want to be
disturbed, you can also turn the ring tone off altogether. If the ring tone is turned off, incoming calls will only be
signalled at the base station and by means of the display on the handset.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the function EXT RING VOL (volume for external calls) or INT RING VOL (volume for internal calls/with
two handsets only) with the
4.
Select the required volume using
.
5.
Now select further menu functions or exit the menu by pressing and hlding the
- Special functions -
button. The
and
buttons.
button.
and
.
and
and confirm with
and
buttons and confirm with
and
and confirm with
.
and
and confirm with
and
buttons and confirm with
and
or switch the ring tone off with VOLUME OFF and confirm with
symbol comes on in the display during
buttons and again confirm with the
button.
.
.
.
.
.
button.
button.
button.
75

Publicité

Table des Matières
loading

Table des Matières