Type Of Use And Contraindications; Forbidden Use - Femi 504B Mode D'emploi Pour L'utilisation Et L'entretien

EN
1.3.

TYPE OF USE AND CONTRAINDICATIONS.

The machine has been designed and built to perform operations involving the removal of
material (such as smoothing, sanding, grinding or sharpening) on any type of metal or similar
materials, with the workpiece being held in the hands
PERMITTED USE
The machine can be used to work on:
• METAL OR SIMILAR MATERIALS
The workpiece must be held in the hands as illustrated in Fig. 33.

FORBIDDEN USE

It is forbidden to:
• HOLD THE WORKPIECE WITH ONLY ONE HAND OR WITH THE INTERPOSITION OF
A TOOL,
• OPERATE ON NON-METALS, ORGANIC MATERIALS AND/OR FOOD STUFFS,
• OPERATE ON MATERIALS WHICH MAY RELEASE TOXIC SUBSTANCES DURING THE
WORK PROCESS.
PERSONNEL AUTHORIZED TO USE THE MACHINE
This machine has been designed and manufactured to be used by qualifi ed personnel with
adequate training, experience and skills. Below you will fi nd a list of basic requirements:
Operators / Apprentices:
• may be male or female
• must be aged 14 or over
• must have full use of both hands
• must have no physical or mental disabilities
• must know and fully understand the contents of the user manual.
PERMITTED AMBIENT CONDITIONS
Ambient condition operating limits:
• operating ambient with a temperature between + 5°C – + 40°C
• relative humidity 50 % at a temperature of + 40 °C
• maximum operating altitude: 1,000 m.a.s.l ;
• the machine must be used in an environment which is protected from the elements.
DANGER - CAUTION
The machine does not have any signifi cant environmental impact, however it must
still be evaluated by the user in order to minimize any possible negative effects.
DANGER - WARNING
THIS MACHINE IS NOT SUITABLE FOR USE IN POTENTIALLY EXPLOSIVE
ATMOSPHERES.
22