Blatchford Avalon K2-VAC Instructions D'utilisation page 17

8 Assembly Instructions
Vacuum System Assembly
1. Push the In-line Filter on to a short piece of vacuum tubing and connect it to the Auto-
Expulsion Valve.
2. Attach a length of vacuum tubing to the In-line Filter and wrap it around the pylon. Connect
the other end of the tube to the Check Valve ensuring that the flow arrow points towards
the ankle. For maximum vacuum, position the Check Valve close to the inlet on the device.
Connect a short length of vacuum tubing from the Check Valve to the inlet on the ankle to
complete the vacuum system.
Auto-Expulsion
Check Valve
(continued)
Valve
17
In-line Filter
Inlet
938432/3-1219