Blatchford Avalon K2-VAC Instructions D'utilisation page 16

8 Assembly Instructions
Hydraulic Ankle and Foot Shell Assembly
Be aware of finger trap hazard at all times.
1.
Place foot in glide sock and slide assembly
into foot shell.
3.
Abraid the top surface of the foot shell.
Bond 12 mm Pelite interface to foot shell
and shape as appropriate. Use Evostik 528
(926213) or equivalent.
12 mm Pelite
2.
Ensure the heel of the keel is fully engaged
in the location feature in the foot shell.
Cutaway
section
through
foot shell
Heel
Engagement
4.
Bond foam cosmesis to top surface of the
Pelite using Thixofix adhesive (926204),
Evostik 528 (926213) or equivalent and
16
shape to suit.
938432/3-1219