General Specifications; Specifications - Harman JBL AVR 101IN Mode D'emploi

AVR

Specifications

Audio Section
Stereo power:
Multichannel power:
Input sensitivity/impedance:
Signal-to-noise ratio (IHF-A):
Surround system adjacent channel
separation:
Frequency response (@ 1W):
High instantaneous current
capability (HCC):
Transient intermodulation
distortion (TIM):
Slew rate:
FM Tuner Section
Frequency range:
Usable sensitivity IHF:
Signal-to-noise ratio (mono/stereo):
Distortion (mono/stereo):
Stereo separation:
Selectivity (±400kHz):
Image rejection:
IF rejection:
75W per channel, two channels driven @
6/8 ohms, 1kHz, <0.9% THD
75W per channel, two channels driven @
6/8 ohms, 1kHz, <0.9% THD
250mV/27k ohms
100dB
Dolby Pro Logic/DPLII: 40dB
Dolby Digital: 55dB
DTS: 55dB
10Hz – 130kHz (+0dB/–3dB)
±28 amps
Unmeasurable
40V/μsec
87.5 – 108.0MHz
1.3µV/13.2dBf
70dB/68dB
0.2%/0.3%
40dB @ 1kHz
70dB
80dB
80dB
AM Tuner Section
Frequency range:
522 – 1620kHz (AVR 101IN)
Signal-to-noise ratio:
38dB
Usable sensitivity (loop):
500µV
Distortion (1kHz, 50% mod):
1.0%
Selectivity (±10kHz):
30dB
Video Section
Television format: PAL (AVR 101IN)
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response (composite
10Hz – 8MHz (–3dB)
video):
HDMI: HDMI 1.4

General Specifications

Power requirement: 220V – 240V AC/50Hz – 60Hz (AVR 101IN)
Power consumption:
<0.5W (standby);
410W maximum
Dimensions (W x H x D):
17-5/16" x 4-3/4" x 11-13/16"
(440mm x 121mm x 300mm)
Weight
12.5 lb (5.65kg)
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
Specifications
31