Connect The Trigger Output; Connect To Ac Power - Harman JBL AVR 101IN Mode D'emploi

AVR

Connect the Trigger Output

If your system has equipment that can be controlled by a DC trigger signal, connect it to
the AVR's Trigger Out connector with a mono 1/8-inch (3.5mm) mini-plug interconnect
cable. The AVR will supply a 12V DC (100mA) trigger signal at this connection whenever
it is powered on.
Mono 1/8-inch (3.5mm)
Mini-Plug Interconnect
(not supplied)

Connect to AC Power

AVR 101IN:
Connect the supplied AC power cord to the AVR's AC Input connector and then to a
working, non-switched AC power outlet.
AVR
AC Input
Connector
Power Cord (supplied)
18
AVR
Device with
Trigger In Connector
AC Power
Outlet
Making Connections