Components; Correct Use - Meister MPH1050-1 Traduction Du Manuel D'utilisation Original

5452810-Bohrhammer_man 15.05.15 13:04 Seite 46
• The specified vibration emission value
was measured in accordance with a
normed test procedure and can be
used in order to compare one power
tool with another.
• The specified vibration emission value
can also be used for an introductory
evaluation of the exposure.
• The vibration emission value may
fluctuate from the specified value
during actual use of the power tool.
These fluctuations will depend on the
way in which the power tool is used.
• All parts of the operating cycle must
be taken into account for this purpose
(for example, also including times in
which the power tool is switched off
and times in which it is switched on,
but is running without load). In order
to prevent the risks caused by
vibrations,
• Wear gloves when using;
• Limit working times and shorten the
actual operating time. Safety measures
must be taken in order to protect the
operator. As a result, the evaluation of
the influence must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the power tool is switched off
and times in which it is switched on,
but is running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out
noise-intensive work during permitted
times. Maintain the quiet periods and
limit your work to the absolute
minimum.
46
All manuals and user guides at all-guides.com
CAUTION! The effects of noise
may cause damage to your
hearing. Only ever work with suitable
ear defenders. Anybody else in the
vicinity should thus also wear ear
defenders.
3 – Components
1 Locking button
2 LED operating display
3 On/Off switch
4 Adjusting wheel for pre-setting the
revolutions
5 Selection lever for right/left rotation
6 Selection knob for drilling/chasing
7 Additional handle
8 Drill chuck
9 Clamping neck
10 Wing screw
11 Crown gear chuck
12 Chuck key
13 Depth stop
4 – Correct use
This hammer drill is designed private
use for drilling in wood and metal,
hammer drilling in brickwork and use as
a screwdriver for wood and metal. This
unit also has a chasing function that can
be used to process brickwork. Only use
suitable accessories (observe the
manufacturer specifications). All other
uses are expressly forbidden.
This device is not designed to be used
by people (including children) with
limited physical, sensory or mental
capacities or those without experience
and/or knowledge. Children should be
supervised to ensure that they do not
play with the device.
The machine is intended only for use in
the household.