Components; Correct Use - Meister KB135M Traduction Du Manuel D'utilisation Original

• The specified vibration emission value
was measured in accordance with
a standardised test procedure and
can be used in order to compare one
power tool with another.
• The specified vibration emission value
can also be used for a preliminary
assessment of the exposure.
• The vibration emission value may
fluctuate from the specified value
during actual use of the power tool,
depending on the way the power tool
is used.
• Try to keep the vibration loads as low
as possible. Examples of measures
that may be taken to reduce the
vibration load include wearing gloves
when using the tool and limiting the
length of the working period. All parts
of the operating cycle must be taken
into account for this purpose (for
example, by also including times in
which the power tool is switched off
and times in which it is switched on,
but is running without load).
3 – Components (Fig. 1+2)
1 Carbon motor brush cover
2 Adjusting wheel for rotary speed
control
3 Suspension eye
4 On/Off switch
5 Housing cap
6 Tool holder with clamping screw
7 Spindle lock
8 Collets
9 Universal spanner
10 Wire brushes
11 Mounted points
12 Saw blade
13 Mandrel for cutting discs / saw
blade
48
5400620-Hand-Schleifmaschine-man.indd 48 5400620-Hand-Schleifmaschine-man.indd 48
14 Cutting discs
15 Mandrel for sanding drums
16 Sanding drums
17 HSS drill bits
18 Diamond burrs
19 Router bits
4 – Correct use
Drilling, grinding, removing sharp edges,
polishing, engraving, cutting, milling
and cleaning wood, metal and plastics
with suitable insertable tools. Use the
machine and accessories only within their
intended scope of applications. All other
applications are expressly excluded.

Correct use

This unit is intended for machining
various materials using insertable tools
which are suitable and approved for
the machine in each case. The machine
must not be used for any other purpose.
Unforeseen damages may occur by
- incorrect use,
- alterations to the machine, and
- the use of parts not tested and
approved by the manufacturer.
This device is not designed to be
used by people with limited physical,
sensory or mental capacities or those
without the necessary experience and/
or knowledge. Children should be
supervised to ensure that they do not
play with the device.Children should be
supervised to ensure that they do not
play with the device.
The machine is intended only for use in
the household.
19.10.20 13:50 19.10.20 13:50