Meister MPH1050-1 Traduction Du Manuel D'utilisation Original page 49

5452810-Bohrhammer_man 15.05.15 13:04 Seite 49
f Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust
related hazards.
4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of
untrained users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
All manuals and user guides at all-guides.com
f Keep cutting tools sharp and clean.
g Use the power tool, accessories
5 Service
a Have your power tool serviced by a
6 Additional safety notes for rotary
hammers
– Only activate the drive switch when
– Never use the rotary hammer as a
– Water must be kept away from parts
– Before you make a setting, service
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
the engine is at a standstill. Switching
with the machine running may cause
damage to the gears.
screwdriver. The tightening and
loosening of screws, nuts and similar
objects using the rotary hammer is
not permitted.
of the electrical tool and from people
in the work place.
or do maintenance on the device,
ensure that the power cable is
49