Components; Correct Use; General Safety Instructions For Handling Power Tools - Meister PH900M Traduction Du Manuel D'utilisation Original

• The specified vibration emission value
can also be used for an introductory
evaluation of the exposure.
• The vibration emission value may
fluctuate from the specified value
during actual use of the power tool.
These fluctuations will depend on the
way in which the power tool is used.
• All parts of the operating cycle must
be taken into account for this purpose
(for example, also including times
in which the power tool is switched
off and times in which it is switched
on, but is running without load). In
order to prevent the risks caused by
vibrations,
• Wear gloves when using;
• Limit working times and shorten the
actual operating time. Safety measures
must be taken in order to protect the
operator. As a result, the evaluation
of the influence must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the power tool is switched off
and times in which it is switched on,
but is running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out noise­
intensive work during permitted times.
Maintain the quiet periods and limit
your work to the absolute minimum.
CAUTION! The effects of noise
may cause damage to your
hearing. Only ever work with suitable
ear defenders. Anybody else in the
vicinity should thus also wear ear
defenders.
30
MW-5402860-Bedien-2008.indd 30 MW-5402860-Bedien-2008.indd 30
3 – Components
1 Selection knob for drilling/
chasing
2 Gear oil filler opening
3 On/Off switch
4 On/Off switch for hammer action
5 Additional handle
6 Depth stop
7 Drill chuck
7a Holding sleeve
8 Flange wrench
4 – Correct use
This rotary hammer is suitable for
drilling and hammer-drilling concrete,
stone, masonry and light chiselling work
around the house. Use only suitable
accessories (note manufacturer's
instructions). All other applications
are expressly excluded. Drill chuck
suitable for tools according to the
SDS+ system.
The machine is intended only for use in
the household.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
26.08.20 10:23 26.08.20 10:23