10.5 Ordinary maintenance
10.5.1 Maintenance of flue manifold
After cleaning the burn pot, remove it from
its housing and clean the space where it is
contained.
•
Remove the ash drawer (Fig. 35).
•
Use the screws to remove the glass air de-
flector (A), remove the side panels (B and C)
inside the fire box and the upper deflector
(D - Fig. 37).
•
Use a flexible brush to clean the ash residues
present in the combustion chamber and in
the side panels.
•
Remove any residues that fall into the exhaust
compartment with the aid of an ash vacuum
cleaner (fig. 38).
D
A
B
C
004778391 - 23/09/2021
ITALIANO
10.5.2 Maintenance of the fume exhaust pipe
GRAZIA
It is recommended to carry out cleaning with the
stove switched off and cold.
• Undo the screws and remove the rear casing
(A).
• Loosen the screws and remove the cap (B) to
access the flue gas duct (C).
• Use a flexible brush to clean the flue gas duct
and vacuum any residual ash.
Fig. 37
C
ENGLISH
FRANÇAIS
Fig. 38
A
B
Fig. 39
81