Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12 PRELIMINARY OPERATIONS
12.1 Pellet loading
The first operation to perform before switching the stove on is to fill the fuel (pellet) tank using the
relevant scoop.
Do not empty the bag directly into the tank to avoid introducing sawdust or other foreign elements
that could prevent the stove from working properly and avoid scattering pellets outside the tank.
Be sure to close the lid of the tank well after loading the pellets. A safety switch (only
for specific models) checks that the lid has been closed correctly and activates an
alarm if the lid has been left open for more than a minute while the stove is operating.
12.2 Electrical power supply
Connect the stove to the mains power, operate the ON switch on the back of the stove, positioning
it to "I" (Fig. 3.2). If the connection is correct, the stove emits a series of intermittent acoustic signals
and the display lights up.
If the stove is not used for long periods,
we recommend turning the switch on
the back of the machine to the OFF (O)
position.
Do not touch the control panel when
the stove is powered on.
12.3 Initial settings
Before using the stove, it is necessary to set the current date and time.
12.3.1 Setting time and date
To change the date:
a) Use the
keys on the set-up menu
b) Select the password "7" with the
c) Scroll with the
key, select the submenu
d) The hour value will flash; change the value with the
e) The minutes value will flash; change the value with the
f) The value of the day will flash; change the value with the
g) The value of the month will flash; change the value with the
h) The value of the year will flash; change the value with the
i) The value of the current day of the week will flash (Monday =
with the keys
j) Press the
key to confirm the data set.
12.3.2 Display brightness setting
It is possible to set the dimming of the display brightness when in standby mode.
a) Use the arrow keys
b) Select the password "7" with the
c) Scroll with the
key and select the sub-menu
d) Use the
and
keys to set the desired brightness value (
key.
12.3.3 Display mode setting
004778391 - 23/09/2021
key and confirm with the
;
to go to the set-up menu
key and confirm with the
ITALIANO
and press the
key
key;
[
]
3
and confirm with the
keys and press the
keys and press the
keys and press the
keys and press the
1
... Sunday =
and press the
key;
[11]
and confirm with the
OFF
ENGLISH
FRANÇAIS
Fig. 3.2
key;
key;
key;
key;
keys and press the
key;
key;
7
); change the value
key;
key;
, 1 ... 5
) and confirm with the
85
Publicité
Chapitres
Table des Matières
