Decorative Panels; Log Placement - Napoleon Elevation Série Manuel D'installation

WARNING
!
• Risk of fi re!
• Never obstruct the front opening of the appliance.
• The front of the appliance must be fi nished with any non-combustible materials such as brick, marble, granite,
etc., provided that these materials do not go below the specifi ed dimension, as illustrated.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.
• Facing and/or fi nishing material must never overhang into the appliance opening.
• The glass door assembly is designed to pivot forward when relieving excess pressure that might occur. Finishing
or other materials must not be located in the opening surrounding the door as this will interfere with the doors
ability to relieve pressure.
9.1

decorative panels

This appliance does not include decorative brick panels, however, panels are required. Panel kits are sold sepa-
rately. Consult your local authorized dealer / distributor. Refer to the 'replacement parts' section.
9.2

log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
Logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that is different in
every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours
may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments burn in
during the heat activated curing process. Blocked burner ports can cause an incorrect fl ame pattern.
OLKEX36
Refer to leafl et provided with kit for log placement instructions.
fi nishing
9.0 fi nishing
DLKEX42
W415-2000 / D / 04.01.20
EN
37