3.1
header shield installation
note:
The header shield provides the minimum clearance to the header. Use only non-combustible material for the
width of the appliance.
1
Remove the 4 screws securing the header shield.
3
Nailing tab
Secure the header shield with 7 screws (provided)
and remove the shipping brackets.
note:
Screw count varies by model.
Shipping bracket
2
Once the header shield is removed, replace the 4
screws removed in step 1.
4
Bend the nailing tabs out 180º.
rough framing
W415-2000 / D / 04.01.20
EN
19