Important - Omron SpotArm i-Q132 Mode D'emploi

HEM-1010-E_[D].book 26 ページ ２０１１年１１月１５日 火曜日 午後７時３５分
3. Using the Unit
To cancel a measurement
If you press the O/I or START/STOP button while the cuff is inflating,
measurement stops and the arm cuff deflates.
Note: As a safety measure, measurement will stop if any
button is pressed.

Important:

If inflation does not stop when the O/I, START/STOP or
any other button is pressed,
Press the emergency deflation switch on the back of the unit.
Note: The clock will also stop if you press the emergency
deflation switch. Reset the date and time.
26
Emergency
deflation switch