SMC Networks EZ Connect Guide D'installation Rapide page 7

4. You will be asked to enter the password to modify the current
configuration settings. By default, the username is admin
and the password is smcadmin. Please enter this information
and press [NEXT].
11
5. You will then be given the option to enable either [Wireless
Bridge] or [Access Point] mode. If you are trying to create
a new 802.11g network for your wireless clients to connect
up to, please select [Access Point] and click [NEXT].
If you are trying to give an Ethernet-equipped device
wireless connectivity, please select [Wireless Bridge]
and click [NEXT]. If you have selected [Wireless Bridge],
please go to Step 6. If you have selected [Access Point],
go to Step 10.
12