Risk Of Burns - Franke FMXO 86 S XS Manuel D'installation Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Ensure that the device is
Z
installed in a way that allows
to disconnect it from the
power supply, with
a contact opening distance
that ensures complete
disconnection in category
III overvoltage conditions.
Means for disconnection must
be incorporated in the fixed
wiring in accordance with the
wiring rules.
Only use the temperature
Z
probe recommended for this
oven.
The appliance shall not be
Z
installed behind a decorative
door in order to avoid
overheating.

Risk of burns!

During use the appliance
Z
becomes hot. Care should
be taken to avoid touching
heating elements inside the
oven. Children less than
8 years of age shall be kept
away unless continuously
supervised.
Risk of burns!
The end of the door handle may
be hotter due to hot air being
vented.
Always make sure that the
Z
control knobs are in the off
position when the oven is not
in use.
FMXO 86 S XS
WARNING: Ensure that the
appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock.
Do not use harsh abrasive
Z
cleaners or sharp metal
scrapers to clean the oven
door glass/ the glass of
hinged lids of the hob (as
appropriate), since they can
scratch the surface, which
may result in shattering of the
glass.
Do not use steam cleaners or
Z
direct jets of water.
If the supply cord is damaged,
Z
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid
a hazard.
CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal
cut-out, this appliance must not
be supplied through an external
switching device, such as a timer,
or connected to a circuit that is
regularly switched on and off by
the utility.
– 5 –
EN

Publicité

Table des Matières
loading

Table des Matières